Using the audio
To play sound from the projector, connect your source to the Audio In con- | connect audio cable |
nector on the projector. |
|
To adjust the volume, use the buttons on the keypad. |
|
Troubleshooting audio
If there is no sound, check the following:
computer: audio cable
• Make sure the audio cable is connected.
• Make sure mute isn’t active (used with the Effect key).
• Make sure the volume is turned up enough. Press the volume button on the keypad.
• Adjust the audio source.
• If playing a video, make sure the playback has not been paused.
video: audio cable and adapter
adjust volume
24
