Advanced menu
Sharpness: (video sources only) changes the clarity of the edges of a video image. Select a sharpness setting.
Color Space: (computer sources only) allows you to select a color space that has been specifically tuned for the input. When Auto is selected, the projector automatically determines the standard. To choose a different set-
Advanced menu
ting, turn off Auto, then choose either RGB, REC709 or REC601.
Sharpness
Color Temperature: changes the intensity of the colors. Select a listed set- ting.
Color Control: allows you to individually modify each color. Highlight the color, press Select, then use the arrows to adjust the value.
Video Standard: (video sources only) When it is set to Auto, the projector |
|
|
| |
attempts to pick the video standard automatically based on the input signal |
|
|
| |
it receives. (The video standard options may vary depending on your region |
|
|
| |
of the world.) If the projector is unable to detect the correct standard, the |
| Color Temperature | Color Control | |
colors may not look right or the image may appear “torn.” If this happens, | Color Space | |||
| ||||
|
| |||
manually select a video standard by selecting NTSC, PAL, or SECAM from |
|
|
| |
the Video Standard menu. |
|
|
|
Overscan: (video sources only) removes noise around the video image.
The following 4 options are for computer sources only.
Phase: adjusts the horizontal phase of a computer source.
Tracking: adjusts the vertical scan of a computer source. | Video Standard |
Horizontal/Vertical Position: adjusts the position of a computer source.
30
