InFocus LPTM425z warranty Preparing to Connect Your Equipment to the Projector

Preparing to Connect Your Equipment to the Projector

Now you’re ready to connect your equipment. Computers are connected to the CableWizard. Video players are connected directly to the projector.

Steps for connecting the different types of equipment are given on the pages listed below.

Equipment you want to connect	Page
Laptop computer with CableWizard	page 10
Desktop computer with CableWizard	page 12
USB or PS/2 mouse	pages 10-11,
	page 13
Video player	page 14

NOTE: Before you continue, make sure the projector and your equipment are turned off. If you’re connecting a computer, make sure the distance between it and the projector is 10 feet or less.

		L/R audio in
s-video	composite	(for video source)	CableWizard
	video

NOTE: The computer audio in connector on the connector panel is only used with the optional CableWizard Lite cable. If you are using CableWizard, the audio cable should be connected to the CableWizard, not directly to the projector.

computer audio in

FIGURE 6

Connector panel

NOTE: If you are connecting an older Macintosh computer that does not have a 15-pin connector, you must use a Mac adaptor between the computer and the CableWizard. See “Optional Accessories” on page 48.

9