Installation Instructions | |
|
|
Cable Management (Optional)
1.Route cables/cords from projector through opening on projector arm and route to wall. (See Figure 18)
2.Guide cables/cords from wall end of projector arm upward or downward through slots in wall plate. (See Figure 18)
2 |
|
2 |
|
| 1 |
Projector arm | Projector |
| |
opening |
|
Figure 18
Add Plastic Covers
3.Add end cap (D) to end of short throw projector arm. (See
Figure 20)
3 | (D) x 1 |
(projector not shown)
Figure 20
1.Add right and left plastic covers (E and F) over brackets. (See Figure 19)
2.Fasten covers using four
|
| (projector not shown) |
| 2 | (HB) x 2 |
| 1 | (F) |
(E) |
|
|
|
| 1 |
| (A) |
|
2 | (HB) x 2 |
|
Figure 19
12 | Visit the InFocus support site at www.infocus.com/support |
