InFocus PZ339-A000-00 How to setup AP mode, How to setup client mode, Wireless LAN connection

Wireless LAN connection

To connect to the projector wirelessly, you need to plug an optional InFocus wireless dongle (p/n SP-WIFIUSB-2) to the USB Type A connector on the projector.

InFocus wireless dongle

(p/n SP-WIFIUSB-2)

How to setup AP mode:

1Make sure the projector is turned on.

2Select Multimedia from source list.

3Go to Settings > WiFi, select AP Mode and set it to ON. See page 42. AP mode is set to ON by default.

AP Mode	SSID	IN2128HDa-606326
	Security	Open
	PSK
	Channel	11	Auto

4Press Source then press Menu to display OSD menu. Go to Advanced Menu >

Setup > Network > Wirless LAN menu.

( Wireless LAN )			MDL: IN2128HDa
			FW: X.XX
SSID	IN2128HDa-606326
IP Address	192.	168.	111. 1
Subnet Mask	255.	255.	255. 0

Previous

5Write down the IP address for network connection.

How to setup client mode:

1Select Multimedia from source list.

2Go to Settings > WiFi, select Client Mode and set it to ON. See page 42.

3Choose the Wi-Fi network which the projector connect to from the Wi-Fi network list, and press Select/Enter.

4Press Select/Enter to display on-screen keyboard, enter the password from the on-screen keyboard, then press Menu to close the keyboard.

5Highlight OK and press Select/Enter to connect.

6Press Source then press Menu to display OSD menu. Go to Advanced Menu >

40