2The Tools page allows you to manage the projector, configure the LAN control settings and remotely access the network operations of this projector.
|
|
| ii |
| iii | |
i |
|
| ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
i.This area is only used with a Crestron Control System. Please contact Cre- ston or refer to the Crestron user manual for setup information.
ii.This area is used for naming the projector, associating it with a particular location, assigning a responsible party to it, and adjusting network settings.
iii.This area is used to set User and Admin passwords. When password protec- tion is enabled, unauthorized changes to the projector configuration will be avoided.
•To prevent errors, only enter alphanumeric characters on the Tools page.
•After configuring the settings, press the Send button and the data will be saved in the projector.
•Press exit to go back to the Crestron remote network operation page.
Please pay attention to the input length and character limitations (including character and punctuation restrictions) listed below:
Category Item |
| Maximum Number of | |
Characters | |||
|
| ||
|
|
| |
| IP Address | 15 | |
Crestron Control | IP ID | 2 | |
| Port | 5 | |
|
|
| |
| Projector Name | 10 | |
Projector | Location | 9 | |
| Assigned To | 9 | |
|
|
| |
| DHCP (Enabled) | (N/A) | |
Network | IP Address | 15 | |
Subnet Mask | 15 | ||
Configuration | |||
|
| ||
Default Gateway | 15 | ||
| |||
| DNS Server | 15 | |
| Enabled | (N/A) | |
User Password |
|
| |
New Password | 20 | ||
| Confirm | 2 | |
| Enabled | (N/A) | |
Admin Password |
|
| |
New Password | 20 | ||
| Confirm | 20 |
/ > < $ % + \ ' " are prohibited.
44
