Connecting the Set Top Box
How to connect
Connect Set Top Box video inputs to AV, COMPONENT, PC or DVI jacks on the Monitor.
Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.
How to use
1Turn on the Set Top Box.
2Press INPUT button on the remote control of the Monitor and select Component1, Component2, PC or DVI.
Supported Signals
|
|
|
|
|
| Component1 | Component2 | PC | DVI |
480i/60Hz |
|
| – | – |
480p/60Hz |
|
|
|
|
576i/50Hz |
|
| – | – |
576p/50Hz |
|
|
|
|
720p/50Hz |
|
|
|
|
720p/60Hz |
|
|
|
|
1080i/50Hz |
|
|
|
|
1080i/60Hz |
|
|
|
|
How to connect
With Component
Connect a three separate component cables to the component jacks of the STB and the Monitor. Connect L (White)and R (Red) sound cables (composite) to the sound jacks of the STB and the Monitor.
With RGB(D-Sub) or DVI
Connect a
Connect L (White)and R (Red) sound cables (composite) to the sound jacks of the STB and the Monitor.
•Component, PC and DVI ports can be displayed only 1 signal among them. If one of them is being displayed, other sockets are unavailable.
OWNER'S MANUAL 
21
