Setting the Picture
Mode
Your the Monitor has 3 automatic factory preset picture settings (“Standard”, “Vivid” and “Mild”).
You can choose Standard, Vivid or Mild by pressing “Picture” button on the remote control (or by making a selection from the menu). Or you can select USER which automictically recalls your personalized picture setting.
1Press Menu/set button to display the main OSD menu.
2Select the picture main menu.
3Press Menu/Set to enter the sub menu.
4Select Mode and press Menu/Set to enter the sub menu. Then the picture sub mode appear.
5Select the picture mode and press Menu/Set button.
6You will see the picture setting bars.
Just Press BACK button on the remote control. You can adjust each values of the picture setting, but the changed values are stored as in USER mode.
USER mode has additional settings in a sub-menu: See next page.
| Mode | Standard |
| ||
| Temperature | Normal |
| ||
| ||
| Video NR | ON |
| ||
| ||
| Film Mode | OFF |
| Screen Format | Wide |
| ||
| ||
|
|
|
|
|
|
|
|
|
Standard
Vivid
Mild
User
Contrast
Bright
Color
Tint
Sharpness
Recall
•Alternative method : Just press the "Picture" button on the remote control. Each time it is pressed, different mode is selected.
OWNER'S MANUAL 
29
