Installing your Avaya 1220 IP Deskphone

Connecting the headset (optional)

If you have a headset, you can connect the headset to the

Avaya 1220 IP Deskphone. For information on how to use your headset with your IP Deskphone, see “Using a headset” on page 96.

1.Plug the headset cord into the headset jack on the back of the IP Deskphone marked with the ) symbol.

Figure 4 on page 36 shows the connections on the back of the Avaya 1220 IP Deskphone.

2.Thread the cord through the channel in the side of the foot stand.

3.Set up the headset according to the headset instructions.

After you have the IP Deskphone working, you must configure the headset using “Configuring a headset” on page 47.

Connecting the power (optional)

Your Avaya 1220 IP Deskphone supports AC power and Power over Ethernet (PoE). For AC power, use only the Avaya-approved Global Power Supply (N0146475) and the country-specific IEC cable that you can order separately. To use PoE, your connected LAN must support PoE.

CAUTION

Use your IP Deskphone with the approved

Avaya AC Adapter (model #N0089601).

Note: Your IP Deskphone supports AC power and PoE options, including IEEE 802.3 standard power. To use local AC power, you can order separately the optional AC adapter. To use PoE, where power is delivered over the CAT5 cable, the LAN must support PoE, and you do not need an AC adapter.

38

Page 38
Image 38
Avaya 1220 manual Connecting the headset optional, Connecting the power optional