Ingersoll-Rand VL2-200 Chaining Information, Parts Ordering Information, Return Goods Policy

CHAINING INFORMATION

1/2, 1, 1-1/2 and 2 ton Hoists	3 and 5 ton Hoists	8 ton Hoist	10 ton Hoist	15 ton Hoist
Single chain fall	Two chain falls	Three chain falls	Four chain falls	Six chain falls

(Dwg. MHP0037) (Dwg. MHP0443) (Dwg. MHP0444)

(Dwg. MHP0038)

(Dwg. MHP0039)

Note:

The 20 ton hoist is similar to the 15 ton hoist but uses one extra idle sheave on the top and bottom hook frames and has eight chain falls.

PARTS ORDERING INFORMATION

Use of other than genuine Ingersoll-Randreplacement parts may result in decreased hoist performance and may invalidate the warranty. For prompt service and genuine Ingersoll-Randparts provide your nearest Distributor with the following:

1.Complete model number as it appears on the nameplate: VL2 plus capacity (VL2-XXX).

2.Part number and part name as shown in manual.

3.Quantity required.

The hoist nameplate is located on the gear cover. Example shown is for a 3 ton VL2 hoist.

For your convenience and future reference it is recommended that the following information be recorded.

Hoist Model Number:__________________________________

Hoist Serial Number: __________________________________

Date Purchased: ______________________________________

Return Goods Policy

Ingersoll-Randwill not accept any returned goods for warranty or service work unless prior arrangements have been made and written authorization has been provided from the location where the goods were purchased. Hoists returned with opened, bent or twisted hooks, or without chain and hooks, will not be repaired or replaced under warranty.

•Continuing improvement and advancement of design may cause changes to this hoist which are not included in this manual. Manuals are periodically revised to incorporate changes. Always check manual edition number on front cover for latest issue.

•If your hoist has special finish requirements for painted parts, please specify when ordering.

Disposal

When the life of the hoist has expired, it is recommended that hoist be disassembled, degreased and parts separated as to materials so that they may be recycled.

MHD56012 - Edition 8 21