Insignia 450TX manual Installed Shows

m

Water Depth

Depth Range Figure B

USING THE 450TX

WHAT YOU SEE ON-SCREEN

installed.	Figure	B shows	the	Bottom Depiction	Zero Line
default	view	when	the
Temp/Speed accessory is			not
installed.
Depth. The digital depth number
shows the water depth directly
beneath the transducer location.

Depth Range. The depth range is shown to the right of the

screen. The upper number is 0

indicating the surface of the water. The lower number is one

of the nine depth ranges available that best match the depth of the

water. As the depth of the water changes, the range changes as necessary in order to retain a bottom representation on-screen.

When in Auto mode, the horizontal line at the top of the screen is the

“zero line,” representing the surface of the water. Occasionally there is a
gap in this line. This gap indicates
the unit is updating the display		Surface Clutter Rocky Bottom
even if the bottom is not visible
on-screen, or if the bottom
information is not changing.
New sonar information appears on
the right side of the graphic area of
the display and moves to the left as
new information is displayed. The
450TX automatically selects the
appropriate depth range to show the
depth of water beneath the
transducer. This range is selected so
the bottom representation is typically
shown about ²⁄₃ down the display.	Hard Bottom Soft Bottom

9