Technical specifications
Laser wavelength | 650nm |
Video system | NTSC |
Frequency response | 20Hz20KHz ±1dB |
Signal/noise ratio | ≥95dB |
Audio distortion + noise | |
Channel separation | ≥85dB |
Dynamic range | ≥85dB |
Output |
|
Audio out (analog audio) | Output level: 2V±10% Load impedance: 10kohms |
Audio out (digital audio) | Output level: 0.5Vp - p |
Video out | Output level: 1Vp - p±20% |
Video load impedance | 75 Ohm, imbalance, negative polarity |
Power supply | DC 9V 2A |
Allowable motion temperature | 5 – 35degrees Celsius |
Power Consumption | ≤20W Dimensions 190×142×29mm |
Weight | 1.18 Kg (2.6 lb) |
This manual is only for your reference. Any change to the design and specifications will not be advised.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Best Buy Corporation and other rights owners. Use of this copyright protection technology must be authorized by Best Buy Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Best Buy Corporation. Reverse engineering or disassembly is prohibited.
Using the battery pack
Attach the battery pack properly by following these directions. Make sure that the battery pack is attached firmly to the player when using it. Otherwise, the battery may become detached and cause person injury. Charge battery pack before using it.
Attaching the battery pack
First disconnect the AC adapter and the power cord from the player, and then attach the battery pack.
1.Turn the player off.
2.Turn the player upside down.
3.Insert the battery pack’s catches into the player’s corresponding holes. Then, slide the battery pack until it is attached firmly.
Note: Remove the battery pack from the player after being used.
Charging the battery pack
1.Turn the player off. The battery pack will charge only when the POWER to the player is turned OFF.
2.Attach the battery pack to the player.
3.Connect the supplied AC adapter and the power cord to the player. Charging starts, and the POWER/CHG indicator light is illuminated. When the charging is complete the indicator light turns off.
- 36 -
