NS-2BRDVD Insignia NS-2BRDVD Blu-ray Disc Player

Press SETUP to close the setup menu.

Press SETUP to close the setup menu.

Note

•Setting your player to a resolution that the TV does not support may cause unpredictable results.

•Only the HDMI jack supports 1080p video output at any frame rate.

•If the TV is connected to the component jacks, video output is limited to 1080i.

•If a device is connected to the HDMI jack, the component output is limited to 480i.

Note

Only the HDMI jack can support 1080p video output. The component jacks are limited to 1080i video output, regardless of the Film Mode setting.

Adjusting the digital audio outputTo the digital audio output:

1Press SETUP. The setup menu opens.

Turning Film Mode on or off

Movies are recorded at a rate of 24 progressive frames (pictures) per second. Many movies recorded on Blu-ray discs are recorded at the 24 progressive frames per second rate.

Not all TVs can display 24 progressive frames per second. In this case you need to turn off the Film Mode option.

To turn Film Mode on or off:

1Press SETUP. The setup menu opens.

2Press or to select a Display, then press to move to the list of options.

3Press or to select Film Mode, then press .

4Press or to select Off or On, then press

ENTER.

5Press to save your selection and return to the previous menu level.

Or

2Press or to select Audio, then press to move to the list of options.

3Press or to select Digital Output, then press to move to the list of options.

4Press or to select a option. You can select:

•PCM—Sends mixed digital audio over HDMI in 7.1CH PCM (if supported by HDMI device) and SPDIF in two-channel PCM format.

•Bitstream HD—Sends the bitstream from the disc over HDMI and SPDIF using highest quality possible. HDMI has higher quality capabilities with advanced audio codecs like TrueHD and DTS-HD. Blu-ray Disc audio is limited to the soundtrack for the main movie and does not send PiP audio or audio effects.

14

www.insigniaproducts.com