Insignia NS-2BRDVD Blu-ray Disc Player

2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment.

3Replace the battery compartment cover.

Notes

•Make sure that you insert the batteries correctly.

•Do not heat, open, or short-circuit batteries.

•Do not throw batteries into a fire.

•Do not mix different types of batteries or mix old and new batteries.

•Do not try to recharge non-rechargable batteries.

•If the remote control does not function correctly or if the operating range becomes reduced, replace the batteries.

Connecting an HDMI TV

HDMI provides the best video and audio. An HDMI cable carries both video and audio. You do not need to make an audio connection.

To connect an HDMI device:

•Connect an HDMI cable (not included) to the HDMI jack on the back of your player, then connect the other end of the cable to the HDMI IN jack on the TV.

Back of player

Connecting a component TV (no sound system)

A component video connection is better than a standard AV connection.

To connect a component TV (no sound system):

1Connect a component video cable (not provided) to the Y, CB/PB, CR/PR VIDEO OUT jacks on the back of your player, then connect the other end of the cable to the corresponding jacks on the component TV.

Standard audio cable

Back of player

Component video cable

2Connect a standard audio cable (not provided) to the L and R AUDIO OUT jacks on the back of your player, then connect the other end of the cable to the corresponding AUDIO IN jacks on the component TV.

Connecting a component TV and sound system using standard audioTo connect a component TV and sound system using standard audio:

1Connect a component video cable (not provided) to the Y, CB/PB, CR/PR VIDEO OUT jacks on the back of your player, then connect the other end of the cable to the corresponding jacks on the component TV.

HDMI cable

Note

The HDMI jack on your player is the only jack capable of outputting 1080i/1080p video and the highest definition audio codecs.

If you want to connect a sound system using HDMI, connect the HDMI jack on your player to the HDMI IN jack on the sound system. Then use another HDMI cable to connect the HDMI OUT jack on the sound system to the HDMI IN jack on the HDMI video device.

Component cable

Standard audio cable

2Connect a standard audio cable (not provided) to the L and R AUDIO OUT jacks on the back of your TV, then connect the other end of the cable to the corresponding AUDIO IN jacks on the sound system.

www.insigniaproducts.com

5