Insignia NS-A3111 manual 11

Insignia NS-A3111 DVD Executive Shelf System

Changing your player’s settings

Menu Available options

SCREEN SAVER–Turn screen saver On or Off.

JPEG TIME–Select the JPEG slide show interval while playing a picture CD. Each picture will display for the duration specified before showing the next one automatically. Choices include 5SEC, 10SEC, and 15SEC.

PASSWORD–Many DVD movie discs contain MPAA rating codes. This shelf system recognizes the codes on these DVDs. This provides a method for you to prevent children from viewing films which are not suitable or that you find objectionable. To unlock the RATING feature or change the password, press the numeric buttons to input the existing password (the factory-set password is "1234"), then press ENTER. You can then change the RATING setting as shown below, or input a new password and press ENTER. An open lock icon indicates that parental lock is NOT active. A closed lock icon indicates that parental lock is active.

	RATING–After entering the password (as
	shown above), Select the highest rating you
	want anyone to view, then lock the password.
	To play a disc with a higher rating, the
	password must be entered. Ratings include:
	• KID SAFE–Content is safe for children.
	• G–Recommended as acceptable for all
		ages.
	• PG–Parental Guidance is suggested.
	• PG-13–Material may not be suitable for
SYSTEM		children under age 13.
	•	PG-R–Parental guidance recommended
SETUP		- very brief mature language or
		situations.
	•	R–Restricted - violence, adult language
		and situations unsuitable for young
		viewers.
	• NC-17–Not recommended viewing for
		children under age 17.
	• ADULT–Should be viewed only by
		adults due to graphic sexual material,
		violence, or language.
	To set the rating when the password is
	unlocked:
	•	In the System Setup menu, press or
		to highlight Rating, then press			.
	•	Press	or	to highlight a rating level
		for the disc inserted, then press OK.
	•	Press	or	to highlight Password,
		then press OK. Use the numeric keys
		(0-9) to enter a four-digit password. If
		you make a mistake before pressing
		OK, press CLEAR and enter your
		four-digit security code again. DVD
		discs that are rated above the level you
		selected will not play unless you enter
		correct the four-digit password.
	SOURCE–Select the source files that you want
	to play between Disc and USB. To access files
	in a USB device, make sure your USB device is
	connected to the USB jack on the front panel.

Note: This system does not support NTFS format. If the USB flash drive does not work, check the USB flash drive file system and format it with FAT or FAT32.

Menu	Available options
	OSD LANGUAGE–Select the language for the
	on-screen display (menus).
LANG(UAGE)	AUDIO LANG–Select the DVD audio language
	you want.
SETUP	SUBTITLE LANG–Select the DVD subtitle
	language you want.
	MENU LANG–Select the DVD menu language
	you want.
VIDEO SETUP	TV TYPE–Sets the aspect ratio of the picture.
	Choices include:
	• 4:3 PS–Select this when your system is
	connected to a normal TV. Wide-screen
	images are shown on the screen, but
	with some parts cut automatically.
	• 4:3 LB–Select this when your system is
	connected to a normal TV. Wide-screen
	images are shown on the screen, with
	black bands on the top and bottom
	• 16:9–Select this when your system is
	connected to a wide-screen TV.
	Note: Some discs may not be able to play according
	to your selection due to the format that has been
	recorded on the disc. For example, a disc recorded
	in 4:3 mode can only be played in 4:3. The TV TYPE
	should correspond to the TV screen.
	VIDEO–Choose video output that matches the
	video connection between your system and TV.
	Choices include:
	• 480i YPBPR–Select this if you have
	connected unit to your TV using Y, Cb,
	Cr video cable.
	• P-SCANYPBPR–Select this if you have
	connected the unit to your TV using the
	Y, Pb, Pr video jacks and are using the
	progressive scan feature.
	Note: You also can press V-SELECTto select this
	directly.

DIGITAL OUTPUT–Select the digital audio format:

•SPDIF/RAW–Digital audio output is in the original format, such as AC3 or DTS.

•SPDIF/PCM–Digital audio output is converted to PCM.

DYNAMIC RANGE– Lets you control the dynamic range so as to achieve a suitable sound for your equipment.

AUDIO SETUP	•	ON–Loud sounds such as explosions
		are toned down slightly.
	•	OFF–The system plays back at the
		recording level on the disc.

SAMPLING–Selects the decode sampling between 96 KHz and 48 KHz.

•48 KHz–Audio is down sampled at

48 KHz if the disc is recorded in

96 KHz.

•96 KHz–Outputs with original audio

format.

Note: This function is only available for digital audio output of a disc recorded in 96 KHz.

www.insignia-products.com 11