Insignia NS-A3111 DVD Executive Shelf System

Setting up your DVD shelf system

Unpacking and setting up

Your carton should contain:

•DVD shelf system

•User Guide

•Remote control with 2 batteries

•AV cable

•FM and AM antennas

•Speakers (2) with speaker wire

If you need to replace any of these items, call our help line mentioned in the Warranty section of this guide.

Carefully remove all the components from the carton and make sure that you have all the necessary components before you dispose of the carton.

•Remove all packing materials from the individual components.

•Do not remove any labels or stickers on the back panel of your shelf system.

•Place your shelf system in the location you want. Your shelf system is designed to be used on a level, stable, flat surface, such as a table, desk, shelf, or stand convenient to a power outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, or vibration.

•Unwind the AC power cord and extend the cord to its full length, then plug it into the back of your shelf system.

Power source

Use the polarized AC line cord provided for operation on AC power. Insert the AC cord plug into a standard 120 V 60 Hz polarized AC outlet.

If you cause a static discharge when touching your shelf system and your shelf system fails to function, unplug it from the AC outlet and plug it back in. Your shelf system should return to normal operation.

Warnings

•The system uses a polarized AC plug with one wide blade and one narrow blade. The plug will only fit into matching polarized power outlets.

This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your power outlets, you probably have outdated, non-polarized outlets which should be changed by a qualified, licensed electrician. Do not file the wide blade on the plug or use an adapter to make the plug fit into your outlet.

•Never connect the AC cord plug to other than the specified voltage (120 V 60 Hz). Use the attached power cord only.

Making connections

Notes

•Make sure that your shelf system is connected directly to the TV, then tune the TV to the correct video input channel.

•Do not connect your shelf system’s AUDIO OUTPUT jack to the PHONO IN jack (record deck) of your audio system.

•Do not connect your shelf system through another VCR. The DVD image could be distorted by the copy protection system.

•The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off your shelf system after removing the disc.

Connecting a TV

If your television is a high-definition or “digital ready” television, you can take advantage of your shelf system’s component/progressive scan output for the highest quality video possible. You only need to make one of the following connections.

Caution

Do not plug in the AC power plug until you have finished making the system connections.

To connect to your TV with component or composite video cable:

•Connect the COMPONENT/PROGRESSIVE OUT jacks (for best picture), or the VIDEO OUT jack (for good picture) on your shelf system to the corresponding in jacks on the TV using the included cables.

Notes

•Progressive scan video quality requires a progressive scan TV and is possible only when using Y Pb Pr connections.

•Once connected, select Progressive Scan as Video Output in the Setup menu to activate the feature.

•Your TV may need adjustment to accept progressive scan feeds.

Composite video cable (yellow -

Component video cable (notincluded) for Good picture included) for Best picture

Back of shelf system

Audio connection

To connect to your TV with audio source:

• Connect the left and right AUDIO OUT jacks on the back of your shelf system to the audio left and right in jacks on the TV using the supplied audio cables.

8

www.insignia-products.com