Insignia NS-A3111 Troubleshooting

Insignia NS-A3111 DVD Executive Shelf System

To program MP3 songs:

To recall a memorized channel:

1 Press PLAYMODE. The Play Mode menu

1

Press STANDBY/ON to turn your shelf

opens.

system on.

2 Press SOURCE repeatedly until Radio mode

PLAY MODE

is selected. Press again to switch between

MODE

AM and FM bands if necessary.

REPEAT

OFF

3

Press

or

on the remote control or

2 With MODE highlighted, press

or

to

or

on the front panel to change

to a different memorized radio channel.

select PROG, then press OK to enter the

4 Use the numeric keys (0-9) to directly recall

MP3 program menu. In this menu, the letter F

the first 10 memorized channels.

means Folder, T means Track.

Troubleshooting

number below F and track number below T.

3 Using two-digit numbers, input the folder

4

Press

,

, , or

to move to another

Under no circumstances should you try to repair

field and repeat Step 3 for the next song.

your shelf system yourself, as this will invalidate

5

Press

or highlight PLAY on the screen,

the warranty. Only qualified service personnel

can remove the cover or service this player.

then press OK to start program playback.

6 Highlight CLEAR on the PROG screen, then

Problem

Solution

press OK to delete all inputs. You can

program up to 16 songs.

No power

• Make sure that the Standby/On button on the

Listening to the radio

front of your shelf system is set to on.

• Make sure that the power cord plug is

correctly connected.

Note

• Make sure that there is power at the AC outlet

Make sure the FM and AM antennas are

by plugging in another appliance.

connected correctly.

No picture

• Make sure that the TV is turned on.

You can program up to 20 FM and 20 AM radio

• Select the correct AV input on the TV.

channels.

• Check the video connection.

To search for a radio station:

• Make sure that the channel selector is set to

AV on the TV (See your TV manual for

1 Press STANDBY/ON to turn your shelf

instructions).

system on.

• When Progressive Scan is on, composite

video output is disabled. Press V-SELECTto

2 Press SOURCE repeatedly until the Radio

select the correct video output mode,

mode is selected. Press again to switch

otherwise, you will have no picture or a

between AM and FM bands, if necessary.

distorted picture.

3 Tune to a radio station by one of the following

Distorted

• Check the disc for fingerprints and clean with

methods:

picture

a soft cloth, wiping from the center to the

•

Manual Tuning—Press

or

edge.

• Sometimes a small amount of picture

repeatedly on the remote control until the

distortion may appear. This is not a

desired frequency appears on the display.

malfunction.

•

Automatic Tuning—Press

or

• The disc format does not match the TV being

on the remote control to start the

used (PAL/NTSC).

• Make sure that only one video output is

AUTO SCAN function. It stops on any

connected.

radio station found. Repeat this process

until it stops on the station you want.

No color in

• The disc format is not the same as that of the

To save a radio station:

the picture

TV being used (PAL/NTSC).

• Make sure that the DVD player is not

1 When you locate a radio station you want to

connected through a VCR.

save, press OK to save it. The memory

Picture

Move your shelf system further away from possible

number will start blinking.

swings

interference or emission sources (for example a

2

Press

or

to select the channel number

radio, power amplifier, or radiator).

that you want the unit to memorize.

Does not

• Check to see if the program requires another

3 Press OK again to store the channel into the

return to

disc to be loaded.

selected memory number. The memory

start-up

• Reset your system by unplugging the power

number will stop blinking to confirm that the

screen

cord, then connect the power again.

channel has been saved.

when a disc

is removed

4Repeat the above steps to save as many as

20 FM and AM radio channels.	The system	• Aim the remote control directly at the sensor
	does not	on the front of the system.
	respond to	• Avoid all obstacles that may interfere with the
Note
	the remote	signal path.
When you tune a weak FM station manually, press
	control	• Inspect or replace the batteries in the remote
AUDIO/FM ST to switch from Stereo mode to
		control.
Mono mode to reduce background noise.

www.insignia-products.com 17