Insignia NS-L42Q120-10A, NS-L46Q120-10A VOL, SET, SET, SET, DVD, STB, AUX, SET, SET, DVD, STB, AUX, SET, SET, DVD, STB, AUX, SET, SET, VOL+, VOL–, Mute, VOL+, Play, Using keymover, CH , and RECALL

NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV

To delete a single learned key:			3 Enter 9 9 3. The LED blinks twice.
1 Press the mode key that you wish to remove the			4 Press VOL-. The red LED blinks four times.
learned key from.			Volume is independently controlled for the
2 Press and hold SET until the LED blinks twice,			selected devices.
then release.			Programming channel lock
3 Enter 9 7 6. The LED blinks twice.			Channel control can be locked so that the Insignia
4 Press the key containing the learned function to
			remote controls a single device’s channel-changing
be deleted, twice. The LED blinks twice and			functions, regardless of operating mode. This is
programming ends.			often enabled by users who watch all broadcast TV
Deleting all learned keys in a specific mode			through one device (for example, a cable set-top
			box). The affected keys are 1 through 0, CH ,
			CH , and RECALL.
	Note
		If more than 10 seconds pass between key presses,	To lock all channel controls to one device:
		the remote exits programming.	1 Press the mode key that relates to the device
		If the LED displays one long flash instead, either
		your batteries are low, or the Insignia remote	that you use for channel changing control.
		control has a memory fault. In either case, the	2 Press and hold SET until the mode LED blinks
		remote cannot learn a new key.
			twice, then release.

To delete all learned keys in a specific mode:

1Press and hold SET until the LED blinks twice, then release.

2Press 9 7 6. The LED blinks twice.

3Press a mode key twice (for example, TV, DVD, STB, or AUX) to clear all the learned keys for that mode. The LED blinks twice and programming ends.

Changing volume lock

The Insignia universal remote control comes preset to allow independent volume control of each selected device (global volume unlock). However, you may change the volume lock setting to global volume lock so that one device's volume controls volume in all other modes. After that, you can perform Individual volume unlock on a selected device to set its volume control for independent operation or global volume unlock to remove all volume locking.

To lock volume control to one mode (global volume lock):

1Press and hold SET until the red LED blinks twice, then release.

2Enter 9 9 3, the LED blinks twice.

3Press the mode key for the device you want to control (for example, TV).

4The LED blinks twice. Now when you press VOL+, VOL–, or Mute, the selected device controls the volume regardless of the current mode.

To unlock all volume control (restoring global unlock):

1Press and hold SET until the red LED blinks twice, then release.

2Enter 9 9 3, the LED blinks twice.

3Press VOL+. The LED blinks four times. Volume is independently controlled for all programmed devices.

To unlock a single device’s volume control:

1Press the desired device mode key (TV, DVD, STB, or AUX).

2Press and hold SET until the red LED blinks twice, then release.

3Enter 9 7 3.The mode LED blinks twice.

4Press CH once. The mode LED blinks twice.

Now, regardless of what mode you select, the channel keys will only change channels on the assigned device.

To unlock channel locks:

1Press and hold SET until the mode LED blinks twice, then release.

2Enter 9 7 3. The mode LED blinks twice.

3Press CH once. The mode LED blinks four times.

Now the channel functions will correlate to the active mode (for example, press CH in TV mode and the TV changes channel accordingly).

Using keymover

Your Insignia universal remote control includes a keymover feature that lets you map (or copy) keys from one mode (such as source mode) to another mode (such as destination mode) or to a different key in the same mode.

Note

Do not use any of the Device Keys, (power),

RECORD, or SET as a source or destination key.

To move keys in the same device mode:

1Press the desired device key (TV, DVD, STB, or AUX).

2Press and hold SET until the LED blinks twice, then release.

3Press 9 9 4. The LED blinks twice.

4 Press the key you want to move.

5Press the new key that should perform the function. The LED blinks twice.

6Repeat Steps 1-5 to move additional keys.

To move keys to a different device mode:

1Press and hold SET until the LED blinks twice, then release.

2Press 9 9 4. The LED blinks twice.

3Press the device key that contains the function you want to move (for example, DVD).

4Press the key you want to move (such as Play).

www.insigniaproducts.com 11