Insignia NS-L42Q120-10A, NS-L46Q120-10A Adjusting the sound, Fitting the picture to the screen, Freezing the picture, Selecting the audio mode, DCM, Off, Low, Off, High, MENU, EXIT, MENU, MENU, EXIT

		NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV
	by reducing motion blur in fast-paced	Adjusting the sound
• DCM—Delivers clear and fast action images
	programming like sports. Image refresh rate
	increases to 120 frames per second (120 Hz).
	increases to 120 frames per second (120 Hz).		Note
	You can select Off, Low, Normal, or High.		Note
	You can select Off, Low, Normal, or High.			Unless otherwise noted, all tasks in this section are
• Advanced Contrast—Sets advanced contrast				Unless otherwise noted, all tasks in this section are
• Advanced Contrast—Sets advanced contrast				based on using the remote control.
	settings. You can select:
	settings. You can select:

•Adaptive Contrast—Automatically adjusts the picture detail and brightness.

•Dynamic Contrast Ratio—Enhances contrast between the light and dark areas of the picture. This feature enables automatic contrast adjustment based on the picture brightness.

6Press or to highlight a setting option, then press ENTER.

Or,

Press or to adjust a setting level, then press

ENTER.

7Press MENU to return to the previous menu, or press EXIT to close the menu.

Fitting the picture to the screen

In TV mode only, your TV can automatically adjust the picture so that everything fits in the visible space of the screen.

To fit the picture to the screen:

1Press MENU. The on-screen menu opens.

2Press or to highlight CHANNEL, then press ENTER. The Channel menu opens.

3Press or to highlight Auto Zoom, then press ENTER.

4Press or to highlight On or Off, then press

ENTER.

5Press MENU to return to the previous menu, or press EXIT to close the menu.

Freezing the picture

There may be instances when you want to jot down information displayed on the TV but you have no pen handy. In such cases, you can “lock” the current display in place.

To freeze the picture:

•Press FREEZE once to “lock” the current display in place.

•Press the button again to resume the regular programming.

Selecting the audio mode

When the Equalizer setting in the Audio menu is set to on, you can press AUDIO to select the audio mode. If the Equalizer setting is set to Off, you can select the audio mode from the on-screen menu.