Insignia
Connecting a computer | 4 Select Air for an outside antenna. Select | |
| Cable, Cable HRC, Cable IRC, or Cable | |
| Auto for cable TV. We recommend that you | |
Warning | ||
select Cable Auto for cable TV. For more | ||
Make sure that you turn off and unplug your TV before | ||
installing devices. | information about cable TV selections, | |
| contact your cable TV provider. | |
Use the following illustration to connect a | ||
5 Press the EXIT button to close the | ||
computer to your TV. | ||
menu system. | ||
|
TV
Audio cable
D SUB cable
Computer
To watch TV on your computer monitor:
1Turn on your TV.
2Press the INPUT button one or more times to select VGA.
3Turn on your computer, then set up your computer for external VGA input. See your computer documentation for more information.
Using your TV
Turning your TV on and off
To turn on your TV:
1Make sure that the power cord is connected to your TV and an electrical outlet.
2Press the 
button to turn on your TV.
3Press the 
button again to turn off your TV
Selecting the TV source
To select the TV source:
1Press the MENU button.
2Press the 
or 
button one or more times to highlight Setup, then press the OK or 
button to open the Setup menu.
3Press the 
or 
button one or more times to highlight Tuning Band, then press the OK or 
button to access the tuning band options.
Setting up the channel list
After you select your TV source (antenna or cable), you need to set up the channel list. When you set up your channel list, your TV searches for all available channels in your area and stores a list of the channels. When your press the CH – or + button, your TV skips the channels that do not have a signal.
Automatically setting up channels
To automatically set up the channel list:
1Press the MENU button.
2Press the 
or 
button one or more times to highlight Setup, then press the OK or 
button to open the Setup menu.
3Press the 
or 
button one or more times to highlight Auto Ch Search.
4Press the OK or 
button to start the search.
Note
You can press the Exit button to stop the search.
Manually adding or deleting channels from the channel list
After you create a channel list using the Auto Ch Search option, you can manually add or delete channels from the channel list.
To add or delete channels:
1Press the MENU button.
2Press the 
or 
button one or more times to highlight Setup, then press the OK or 
button to open the Setup menu.
3Press the 
or 
button one or more times to highlight Manual Ch Set, then press the OK or 
button to access the Manual Ch Set options.
4Press the 
or 
button to select a channel, then press the OK button to add or delete a channel.
5Press the EXIT button to close the menu.
Changing channels
To change channels:
•Press the CH – or + button on the remote control to go to the next lower or higher channel.
Or
Press the number buttons to select a channel. For example, if you want channel 83, press 8, then press 3.
Or, press the 
button to go to the last viewed channel.
13 |
