Insignia
Connecting speakers | Use the following illustration to connect an |
| outside antenna. |
To connect speakers to your TV:
1Unplug the TV power cord and all devices connected to your TV.
2Place your TV, face down, on a soft surface so that you do not damage the screen.
3Attach each speaker and fixed board (1) to the back of your TV with the supplied screws (2), then tighten the screws.
VHF/UHF antenna
Antenna cable
|
|
|
| VHF/UHF | ||||
|
|
|
| antenna | ||||
|
|
|
| OR | ||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| cable | ||
| Combination antenna | |||||||
Separate antennas |
|
| UHF | |||||
|
|
|
|
|
| antenna | ||
OUT |
| IN |
|
|
|
|
| |
|
|
|
|
|
| |||
|
|
|
| VHF | ||||
|
|
|
| |||||
|
|
|
|
|
|
| antenna | |
| Combiner |
|
| |||||
|
|
| ||||||
|
|
| ||||||
|
|
| ||||||
4Snap the covers (3) over the speakers.
5Connect the speakers to the speaker jacks on the back of your TV. Make sure that you connect the black part of the speaker wire to the – jack and the red part of the speaker wire to the + jack on the back of your TV.
Note
The location of the speaker jacks on your TV may vary from the illustration.
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and 300 ohm.
75 ohm cable
If your antenna cable has a 75 ohm connector, connect the cable to the coaxial jack on the back of your TV.
If your antenna cable has a 300 ohm connector, connect the cable to a
Connecting cable TV
Your TV has a 75 ohm jack for connecting cable TV.
Some cable TV providers scramble the signals for “premium” (pay) channels. To view these channels you need a converter/descrambler box.
If you do not have a converter/descrambler box, you can connect your cable TV directly to your TV. If you have a converter/descrambler box, you can connect your cable TV using an RF switch (not supplied). For more information about connecting a converter/descramble box, contact your cable TV provider.
To connect cable TV without a converter/descrambler box:
1Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV.
2Connect the other end of the cable to the cable TV wall outlet.
9 |
