Insignia NS-LCD27FS manual Programming the remote, Control, Programming a device connected to your

Insignia NS-LCD27FS 27” LCD TV

On-screen		Options		4	Press and hold the SET button on the remote
					control until the LED blinks twice, then
menu
					release the button.
Setup		Tuning Band–Selects the TV signal source. For		5	Enter the first five-digit code for your device.
		more information, see “Selecting the TV			The LED blinks once as each digit is entered.
		source” on page 13.
					If the code is correct, the LED blinks twice.
		DTV Signal–Displays the digital TV signal
		strength. For more information, see “Checking
		the DTV signal strength” on page 14.			Note
		Auto Ch Search–Automatically sets up a list of				If the LED does not blink twice, repeat steps 3
						through 5 using a different code.
		the channels available in your area. For more
		information, see “Automatically setting up		6	Aim the remote at the device, then press the
		channels” on page 13.				button.The device should turn off.
		Manual Ch Set–Lets add or delete channels
		from the channel list. For more information,
		see “Manually adding or deleting channels			Note
		from the channel list” on page 13.				If the device does not turn off, repeat steps 4
		Channel Labels–Lets you add a label to a				through 6 using a different code. If you cannot find
						a code that works, see “Searching for a code” on
		channel. For more information, see “Adding a				page 17.
		channel label” on page 14.		7
					Repeat steps 1 through 6 to program
Feature		Source–Selects the video source. You can
					additional devices.
		select:
				8	Press the SET button to save the code and
		•	TV
		•	Composite1		exit.
		•	Composite2	Searching for a code
		•	Component1
		•	Component2	To search for a code:
		•	VGA
		•	HDMI	1	Press a device key.
		•	S-Video	2	Press and hold the SET button until the LED
		You can also press the INPUT button to select
		the video source.			blinks twice, the release the button.
		Time Set–Sets the clock. For more		3	Enter 991, then the device group number
		information, see “Setting the clock” on			(0=cable, 1=TV, 2=VCR, 3=audio). The LED
		page 14.			blinks twice.
		Sleep Timer–Sets the sleep timer. For more
				4	Aim the remote control at the device, then
		information, see “Setting the sleep timer” on
		page 15.			press the		button. If the device responds,
		Parental Control–Access V-chip controls. For			go to step 7.
		more information, see “Setting parental		5	If the device does not respond, press the
		controls” on page 15.			CH+ button. Your remote control will try the
		Closed Caption Options–Customizes closed
					next code. Keep pressing the CH+ button
		captions for digital broadcasting systems. You			until the device responds. You can press the
		can adjust Size, Font, Text Color, Text Opacity,
					CH– button to try a previous code.
		Background Color, Background Opacity, Edge
		Effect, and Edge Color.		6	To search for a code for another device,
		CC when Mute–When this option is turned on,			repeat steps 1 through 5.
		your TV automatically displays closed captions		7	Press the SET button to save the code and
		when the volume is muted.
					exit.
		Menu Language–Select the language for the
		on-screen menu system. You can select		Checking the code
		English, French, or Spanish.		If you programmed a device by searching for a
Programming the remote				code, you may want to know what four-digit code
				the remote is using.
control				To check the code:
Programming a device connected to your				1	Press the device button on the remote
TV					control.
				2	Press and hold the SET button until the LED
The remote control can control four devices,
					blinks twice, then release the button.
such as a VCR, DVD player, cable or satellite
				3	Enter 990. The LED blinks twice.
receiver, amplifier or tuner, or similar device.
				4	Press 1 and count the LED blinks. This is the
To program the remote control:
					first digit of the code. For example, if the LED
1 Find the code for the device you want to					blinks twice, the first digit is 2. If the LED
	program. See “Appendix” on page 19. If there				does not blink, the first digit is 0.
	is more than one code listed for a device,			5	Repeat step 4 using 2 for the second digit, 3
	write down all the codes.				for the third digit, 4 for the fourth digit, and 5
2 Turn on the device you want to program, and					for the fifth digit.
	load media if required, for example a DVD.			6	Press the SET button to exit.

3Press a device key on the remote control, for example, DVD, CBL, or AUX.

www.insignia-products.com 17