|
|
|
|
|
|
| Insignia |
Connecting a computer | Using your television | ||||||
Using the Remote Control
Use the remote control by pointing it towards the television’s remote sensor window. Objects between the remote control and sensor window may prevent proper operation.
To audio output jack
To monitor port (VGA)
TV right side
Audio cable (stereo mini plugs)
VGA
VGA cable (analog RGB)
To connect a computer:
1Connect a VGA cable between the VGA jack on the computer and the VGA input jack on the television.
2Connect an audio cable between the AUDIO input jack on the television and the AUDIO output jack on the computer.
To play video from a computer:
1Turn on your television, then press the INPUT button. The SOURCE INPUT menu opens.
2 Press 
or 
to select VGA, then press OK to confirm.
3Turn on your computer and adjust the display
properties as required.
30 | 3 |
| 0 |
5m
Caution
•Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity.
•Do not install or place the remote control under direct sunlight. The heat may cause deformation of the television.
•The remote control may not work properly if the remote sensor window of the main television is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or television set, or operate the remote control closer to the remote sensor window.
Note
This illustration is for reference only. The remote sensor may be in different locations on different models.
Turning the television on and off
To turn the television on:
1Insert the power cord into the wall socket.
2Press 
on the remote control or television. The television turns on.
To turn the television off:
•Press 
on the remote control or television. The television turns off.
Viewing the menus and displays
This television has an
10 |