Options include:
•Air
•Cable
•Cable HRC
•Cable IRC
•Cable Auto
Insignia
2Press 
or 
to select Setup menu, then press OK or 
to access the submenu.
Note
If using cable, select the type of cable system your television is connected to. If you are not sure, select Cable Auto.
4Press EXIT to return to watching the television.
Searching for channels
You should complete an auto channel search to search for all channels available to your television. The television then stores them in memory on the channel list.
To search for channels:
1Press MENU.
3Press 
or 
to select Add On Ch Search,
then press OK or 
to begin the add on channel search. The television automatically searches for new stations and adds them to the channel list.
Note
If you want to stop the search, press the EXIT button.
2Press 
or 
to select Setup menu, then press OK or 
to access the submenu.
3Press 
or 
to select Auto Ch Search,
then press OK or to begin the auto channel search. The television automatically searches for all available TV/DTV (if using an antenna) or CATV/CADTV (if using cable) program.
Manually adding or deleting channels
After saving channels into memory, you can manually add or delete channels from the channel list.
To manually add or delete channels:
1Press MENU.
2Press 
or 
to select Setup menu, then press OK or 
to access the submenu.
3Press 
or 
to select Manual Ch Set, then
press OK or 
to open the Manual Channel Set Menu.
Note
If you want to stop the search, press the EXIT button.
Automatically adding channels
After the initial auto channel search, you can use the Add On Channel Search option to search for new stations, and add them to the channel list.
To automatically add channels: 1 Press MENU.
4 Press 
or 
to navigate and select a channel, then press OK to add (displays Viewable) or delete (displays Not Viewable) the channel.
12 |