10
Insignia NS-R27TR 27" Round Tube TV/DVD/VCR Combo
www.insignia-products.com

Connecting a digital audio device

Use the following illustration to connect a digital
audio device.
Using the TV

Watching TV

To watch TV:
1Connect your antenna, cable TV, or satellite
receiver.
2Plug your TV combo power plug into a power
outlet.
3Press the POWER button to turn on your
TV combo.
4Press the CH or CH button or use the
number buttons to select a channel.
5Press the VOL. or VOL. button to adjust
the volume. Press the MUTE button to mute
or un-mute the sound.

Changing channels

To select a memorized channel:
• Press the CH or CH button.
Or
• Press the appropriate number buttons. If you
are selecting a channel number larger than
100, press the +10/+100 button, then press
the number buttons for the two lower digits of
the channel button. For example, if you want
to select channel 120, press the +10/+100
button, press 2, then press 0.

Major and minor channels in digital TV (DTV)

A digital TV (DTV) channel has a main (major)
channel and may have one or more
sub-channels (minor channels).
When you use the CH or CH buttons to
select a channel, the major channel is tuned first
followed by the minor channels.
To select a minor channel with the number
buttons:
• Press the number buttons for the major
channel, then press the number buttons for
the minor channel. For example, if the major
channel is 12 and the minor channel is 3,
press 1, then 2, then 0, then 3. (You must
press the 0 if you are selecting a single-digit
minor channel number.
To search for a minor channel for the major
channel your are currently watching:
• Press the +10/+100 button.
If the major channel has a one-digit channel
number, press the number button for the
major channel, press the ENTER button,
then press the number button for the minor
channel.
If the major channel has a two-digit channel
number, press the number buttons for the
major channel, then press the number button
for the minor channel. If you press the
ENTER button after you enter the two-digit
major channel number, your TV combo tunes
to the smallest minor channel number.

Switching modes

To switch modes:
• Press the INPUT button one or more times to
select the TV/VCR or DVD mode. The
corresponding indicator light turns on the
front of your TV combo. For the location of
the indicator lights, see “Front control panel”
on page 6.

Adjusting picture settings

To adjust picture settings:
1Press the PICTURE button.
2Within five seconds, press the PICTURE
button to select the setting you want to
adjust. You can select:
•BRIGHT–Increases or decreases the
brightness.
•CONTRAST–Increases or decreases the
contrast.
•COLOR–Sharpens or softens the color.
•TINT–Adjusts the tint from purple to
green.
•SHARPNESS–Increases or decreases
the sharpness.
3Press the or button to adjust the setting.
NoteUnless noted, all buttons in the following
instructions are remote control buttons.
NoteThe first time you connect your TVcombo to an
antenna or cable TV, it automatically scans for
and memorizes available channels.
NoteIf you are using a cable converter box or satellite
receiver, set your TVcombo to channel 3, 4, or
AUX, then use your cable converter box or
satellite receiver to change channels.
AUDIO OUT
COAXIAL
MD deck, DAT deck
Dolby Digital
decoder
AUDIO OUT COAXIAL
jack (DVD/DTV AUDIO
OUT)
Coaxial digital
audio input jack on
external device
Back of TV combo
Cables not included
NoteTV/VCR mode includes analog TV, DTV, or AUX
mode. To use the VCR, select the TV/VCR mode.
NoteYour TVcombo saves this setting even if you turn
off your TVcombo or disconnect the power.
NS-R27TR.fm Page 10 Thursday, March 29, 2007 11:41 AM