16
Insignia NS-R27TR 27" Round Tube TV/DVD/VCR Combo
www.insignia-products.com
To block TV program ratings:
1Make sure that you are in TV/VCR mode by
pressing the INPUT button.
2Press the SETUP button.
3Press the or button to select V_CHIP
SET UP, then press the ENTER button.
4Enter your password with the number
buttons. The default password is 0000. For
first time setup or if the power fails, use the
default password.
5Press the or button to select TV
RATING, then press the ENTER button.
6Press the or button to select the rating
you want to block or unblock, then press the
ENTER button to change the setting to
BLOCK or VIEW. When you block a rating,
that rating and all higher ratings are blocked.
7If the rating you selected has sub-ratings,
press the or button to select to select a
sub-rating, then press the ENTER button to
block the rating.
8Press the SETUP button to close the menu.
To block movie ratings:
1Make sure that you are in TV/VCR mode by
pressing the INPUT button.
2Press the SETUP button.
3Press the or button to select V_CHIP
SET UP, then press the ENTER button.
4Enter your password with the number
buttons. The default password is 0000. For
first time setup or if the power fails, use the
default password.
5Press the or button to select MPAA
RATING, then press the ENTER button.
6Press the or button to select the rating
you want to block or unblock, then press the
ENTER button to change the setting to
BLOCK or VIEW. When you block a rating,
that rating and all higher ratings are blocked.
7Press the SETUP button to close the menu.

Changing your password

To change your password:
1Make sure that you are in TV/VCR mode by
pressing the INPUT button.
2Press the SETUP button.
3Press the or button to select V_CHIP
SET UP, then press the ENTER button.
4Enter your password with the number
buttons. The default password is 0000. For
first time setup or if the power fails, use the
default password.
5Press the or button to select CHANGE
PASSWORD, then press the ENTER button.
6In the NEW PASSWORD box, enter your
new password with the number buttons, then
enter your new code again in the CONFIRM
PASSWORD box.
7Press the SETUP button to close the menu.
Using the VCR
Your TV combo can play any videotape that has
the VHS mark. Use high quality tapes. Avoid
using poor quality or damaged tapes.
You can play videotapes recorded in SP
(standard play mode), LP (long play mode), and
SLP (super long play mode).

Playing a videotape

To play a videotape:
1Insert a pre-recorded videotape into the
videotape compartment. Your TV combo
turns on automatically.
2Make sure that your TV combo is in TV/VCR
mode by pressing the INPUT button. The
TV/VCR indicator lights on the front of your
TV combo.
3Press the PLAY button to start playback.
4To stop playback, press the STOP button.
5To rewind the videotape, press the
SKIP/REW button. To fast-forward the
videotape, press the FWD/SKIP button.
To stop rewinding or fast-forwarding, press
the STOP button.
6To eject the tape, press the
STOP/EJECT button on the front of your
TV combo.

Adjusting the tracking

Your TV combo automatically adjusts the
tracking when you start playback. If you see
noise lines (black and white streaks) on the
screen, you can manually adjust the tracking.
To manually adjust the tracking:
1While the videotape is playing, press the
CH or CH button until the streaks
disappear. This feature works during normal
playback and in pause, still, and stop modes.
2To stop manual tracking, stop playback, then
start playback again.

Freezing the picture

To freeze the picture:
1During playback, press the PAUSE•SLOW
button.
You can advance the picture one frame at a
time by pressing the PAUSE•SLOW
button.
NoteTo change a rating, your TVcombo must be tuned
to an unblocked program. If the message
“PROTECTED PROGRAM” appears, change the
channel to an unblocked channel.
NoteIf your TVcombo is in DVD mode, you can start
playback by pressing the PLAY button on the
VCR side (right) of the front of your TVcombo.
NS-R27TR.fm Page 16 Thursday, March 29, 2007 11:41 AM