Integra DPC-5.2 Optional Audio Connections, Digital connections, Making stereo audio connections

Making Connections

Optional Audio Connections

This DVD Changer provides numerous ways to take full advantage of the digital multi-channel sound recorded on DVD and some CD media.

Be sure to set Digital Audio Out after connection using the setup menu explained in “Customizing the Settings” starting on page 30.

Digital connections

Make digital connections from the DVD Changer to an AV component that features digital input capability or one or more multi-channel audio decoders to realize the full cinematic experience made possible by the DVD format. This DVD Changer features optical and coaxial digital audio output jacks and can output Dolby Digital and DTS bitstreams as well as outputting standard PCM.

Make connections from the DIGITAL OUTPUT OPTICAL jack to the digital optical input jack on the AV component using an optical fiber cable (sold separately). Make connections from the DIGITAL OUTPUT COAXIAL jack to the digital coaxial input jack on the AV component using a coaxial cable (sold separately). It is not necessary to make more than one type of digital connection to a single component.

When you are making connections to an amplifier or receiver that has internal Dolby Digital or DTS decoding capabilities, set Digital Audio Out to “Dolby Digital” or “DTS” using the setup menu explained in “Customizing the Settings” starting on page 30. See page 35 for direct information.

When you are making connections to an amprifer or receiver that has digital input capabilities, but no internal decoder, set Digital Audio Out to “PCM” using the on-screen menu explained in “Customizing the Settings” starting on page 30. See page 35 for direct information. Setting Digital Audio Out to any other setting could result in digital noise being output that could cause harm your hearing and may also damage your speakers.

Notes

•Refer to the instructions supplied with the AV component for details on what digital audio formats it is compatible with.

•Even if digital audio connections are made, it is also recommended to make analog connections, because some conditions or media may prohibit digital audio output.

Coaxial cable (not supplied)	To digital
	input (coaxial)
		An amplifier or receiver with a
Optical cable (not supplied)		Dolby Digital or DTS decorder or
		digital inputs
	To digital
	input (optical)
		AC INLET

VIDEO OUTPUT

COMPONENT

PR

PB

RS 232

AUDIO	DIGITAL OUTPUT	DVD CHANGER	DO NOT connect the
OUTPUT		MODEL NO. DPC-5.2	power cord until all
VIDEO	COAXIAL OPTICAL
			connections are
L			complete.

Y

R

S VIDEO

Making stereo audio connections

Using an audio cable (sold separately), make audio connections from the AUDIO OUTPUT L and R jacks to the corresponding jacks on the stereo component.

Be sure to set Digital Audio Out setting to “PCM” using the setup menu explained in “Customizing the Settings” starting on page 30. See page 35 for direct information.

Notes

•Be sure to match the colors of the plugs on the cable with the corresponding jacks on the DVD Changer and the stereo component: red for R (right) audio and white for L (left) audio.

•Do not make connections to the PHONO or TUNER jacks on the stereo component.

To audio input

An amplifier or receiver

with stereo inputs

Audio cable (not supplied)

Audio (R) Analog signal

Audio (L)

Digital signal

Coaxial plug

Digital signal

Optical plug

Signal flow

16