Integra Connecting -compatible Components, Hdmi & the DPC-7.7, Video, Audio Formats

Connecting the DPC-7.7—Continued

Notes:

•The DPC-7.7 supports HDCP (High-bandwidth Digi- tal Content Protection), a protection system for digital video. HDMI components that you connect to the DPC-7.7 must also support HDCP.

•The DPC-7.7 supports High-Definition Multimedia Interface Specification Information Version 1.0.

HDMI & the DPC-7.7

■Video

The DPC-7.7’s HDMI OUT supports the following video resolutions:

•720 x 480p 60 Hz

•1280 x 720p 50/60 Hz

•1920 x 1080i 50/60 Hz

If the connected HDTV or projector doesn’t support a resolution, you may get no picture.

On the DPC-7.7, you can select a resolution suitable for use with the connected HDTV or projector (see

page 41).

■Audio Formats

The DPC-7.7’s HDMI OUT supports the following audio formats:

•PCM (48 kHz, 44.1 kHz, 96kHz)

•Dolby Digital

•DTS

If your TV only supports HDMI digital audio up to

48 kHz, change the Linear PCM Out setting to Down Sample On (see page 47).

If your TV doesn’t support Dolby Digital, set the Digital/ HDMI Audio Out setting to PCM (see page 47).

If your TV doesn’t support DTS, the DPC-7.7 will not be able to play DTS format audio or soundtracks. In this case, on your DVD-Video disc’s audio setup menu, select an audio format other than DTS.

Connecting -compatible

Components

AV receiver

IN

L

REMOTE

CONTROL

R

•The remote controller supplied with Integra/Onkyo AV receiver or amplifiers can be used to control the DPC-7.7.

•The function of the upper and lower connectors are the same. Connect to either one.

•Connecting an cable only does not make the sys- tem operational. You must also connect the audio cables as well.

•For remote control operation, you must make an ana- log RCA connection between your DPC-7.7 and the other AV component, even if they are connected digi- tally.

21