Integra DTR-8.3 IntelliVolume Sub-menu, Listening Mode Preset Sub-menu, Trigger Setup sub-menu

Input Setup

Once 10 characters are entered, you will automatically return to the previous screen. If the name is completed before you enter 10 characters, enter spaces until 10 characters are entered.

To change an existing character, move the cursor backward with the RETURN button or forward with the ENTER button to the location of the mistaken character and then enter the desired character as explained above. To erase a character, enter a blank space in its place. After you have completed the name, press the ENTER button until you return to the Character Input Sub-menu.

2-5. IntelliVolume Sub-menu

This sub-menu allows you to adjust for the volume differences between your various input source components.

Advanced Menu

2.Input Setup Input:DVD

2-5.IntelliVolume Setup

Input:DVD

a.IntelliVolume

: 0dB

Quit:SETUP

a. IntelliVolume

When switching input sources, you may find that the output level for different components or input sources connected to the DTR-8.3 is different even though the main volume setting is the same. Under normal circumstances, you would then have to change the volume setting each time you change the input source. This Intelli Volume setting allows you to preset a volume level for each input source separately so that when you do switch from one input source to another, the DTR-8.3 adjusts the volume accordingly and the volume stays the same. To set the Intelli Volume, simply select an input source at the front panel, and if that source is quieter than other sources, increase its decibel level with the cursor button, or if it is louder than other sources, decrease its decibel level with thecursor button.

The Intelli Volume can be adjusted between –12 and +12 decibels.

2-6. Listening Mode Preset Sub-menu

With the DTR-8.3, you can set a different listening mode for each different signal type that comes from each input source. For example, if your DVD player also plays compact discs and the DVD video signal is Dolby Digital and the compact disc signal is PCM, then you can set a different listening mode for each.

This is especially convenient if you frequently play the same types of movies or music.

Advanced Menu

2.Input Setup Input:DVD

2-6.ListeningMode Preset

Input:DVD a.Analog/PCM

:Stereo b.PCM fs=96k :Stereo c.Dolby D :Dolby D

d.DTS :DTS e.D.F.2ch

:PLII

f.D.F.Mono:Mono

Quit:SETUP

*The 5.1-channel digital surround format has a variety of versions including Dolby Digital and DTS. The 5.1- channel digital surround format enables the individual recording and playing of five full-range (20 Hz to 20 kHz) channels (left and right front, center, and two surround channels) plus an LFE channel (Low Frequency Effect) for the low-range effect sound. It will create a realistic sound that can be heard in the theaters and concert halls.

2-7. 12V Trigger Setup sub-menu

Advanced Menu

2.Input Setup Input:DVD

2-7.12V Trigger Setup

Input:DVD

a.Trigger A	:On
b.Trigger B	:Off
	Quit:SETUP

This sub-menu allows you to make the required settings to turn on the output from the 12V TRIGGER terminal to control another component or device with the DTR-8.3 for each input source.

a.Trigger A

On: Select to activate the device connected to the 12V TRIGGER A terminal when the input source is selected.

Off: Select when no device is connected to the 12V TRIGGER A terminal or you do not want the connected device to activate.

b.Trigger B

On: Select to activate the device connected to the 12V TRIGGER B terminal when the input source is selected.

Off: Select when no device is connected to the 12V TRIGGER B terminal or you do not want the connected device to activate.

52