Integra DV-SP301 If your TV has Component Input connector, To component video inputs, Complete

Audio (R)

00_DV-SP301.book Page 15 Friday, April 18, 2003 4:18 PM

■If your TV has Component Input connector

If the TV or monitor has component video inputs, making this type of video connection will produce ideal picture quality for the presentation of DVD-Video. Using a component video cable (sold separately), connect the VIDEO OUTPUT COMPONENT jacks to the corresponding component video input jacks on the TV. Actual labels for component video inputs may vary depending on the TV manufacturer. (e.g., Y, R-Y, B-Y or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

In the same manner, make audio connections from the ANALOG OUTPUT L and R jacks to the corresponding audio input jacks on the TV.

This connection is necessary to use progressive function.

To view Progressive scan video, you need a TV with Progressive scan capability. Please check your TV’s manual.

Notes

•The DVD Player can output NTSC or PAL format video depending on the setting on page 34. Make sure your TV supports the disc’s video format.

•Progressive scan can only works with NTSC format discs.

Audio/video cable (supplied) To audio inputs

Signal flow Audio (L) Audio (L)

Audio (R)

Component video cable (not supplied)

L

AUDIO

R

Signal

flow

AUDIO OUTPUT

DIGITAL ANALOG

OPTICAL COAXIAL L DVD PLAYER

MODEL NO. DV-SP301

R

PR

PR PR

PB

PBPB

Y

YY

To component video inputs

VIDEO OUTPUT

	COMPONENT
	PR	REMOTE
		CONTROL
VIDEO	PB	Connect the power cord
		after all connections are
S VIDEO	Y	complete.

15