Integra instruction manual Getting to Know the RDV-1.1, Front Panel

Getting to Know the RDV-1.1

Front Panel

1 B C D E F G H

I J K L M N O

For detailed information, refer to the pages in parenthesis.

APower switch (43)

This is the main power switch. When set to OFF, the RDV-1.1 is completely shutdown. When set to ON, the RDV-1.1 can be set to On or Standby.

BStandby/On button (43)

This button is used to set the RDV-1.1 to On or Standby.

COn & Standby indicators (43)

The On indicator lights up when the RDV-1.1 is set to On. The Standby indicator lights up when it’s set to Standby.

DDisplay

See “Display” on page 17 for more information.

ERemote control sensor (15)

This sensor receives control signals from the remote controller.

FDisplay button (64)

JVideo Input knob (67)

This knob is used to select the video input source: DVD (the RDV-1.1), External (component video input, S-Video input, or composite video input), or HDMI (HDMI input).

KDVD, External & HDMI indicators (67)

These indicators show the currently selected video input source: DVD, External, or HDMI.

LDisc tray (46)

Discs are loaded onto the disc tray.

MOpen/Close button (46)

This button is used to open and close the disc tray.

NStop button (47)

This button is used to stop playback.

OPlay button (47)

This button is used to start playback.

This button is used to display information about the disc, title, chapter, group, or track, including the elapsed time, remaining time, total time, and so on.

GPrevious [ ] button (49, 53, 50)

This button is used to select the previous chapter or track. During playback it selects the beginning of the current chapter or track.

HNext [ ] button (49, 53, 50)

This button is used to select the next chapter or track.

IVideo Circuit Off button & indicator (67)

This button is used to turn off all of the internal video circuitry, eliminating the possibility of inter- ference when playing audio-only discs. The Off indicator lights up when the video circuitry is turned off.

16