Integra RDV-1.1 instruction manual Selecting the Interlaced Setting, Progressive Setting

Configuring the RDV-1.1—Continued

On Standby

TV

I Input

	1	2	3	+
				TV CH
	4	5	6	-
	7	8	9
				TV VOL
	+10	0	Clear
	Search	Memory	Dimmer	Amp Input
	S	M	D	Input
		Amp Input
	DVD	V1	V 2	V3
		Mode
	DVD	Amp	VCR	TV
	Zoom On			Picture Control
Enter		enu	M
	Audio	opM	enu
	Sel	T

+

CH
Zoom		Enter		VOL
L Mode
-
	R	eturn	p
			Setu		Setup
Display				Muting
Last Memory		Step/Slow		Random
Rec LM				RD
Audio	Subtitle		Angle	Resolution
Audio	Subtitle		Angle	Rsltn
Repeat		A-B		Aspect
Repeat		A-B		Aspect
Video Input	Video Off		Learning

Selecting the Interlaced Setting

1

Remote controller

Enter

or

Enter	Select Interlaced Setting 1, 2, or
	3, and then press the [Enter] or
	Right [ ] button.
	The parameters appear onscreen.
2	Use the Up and Down [ ]/[	]
Remote controller	buttons to select the parameters,
	press the [Enter] button, and
	then use the Left and Right [	]/
Enter	[ ] buttons to set them.

3	Press the [Enter] button.
Remote controller	The setting is stored.
	Use the same procedure to set the other
Enter	parameters, pressing the [Enter] button
	when you’ve set each one.
	Press the [Setup] button to exit the
	onscreen setup menu.

74

Progressive Setting

With this setting you can adjust various picture parame- ters for progressive scanning. There are three setup memories (1, 2, 3) for storing your favorite settings. You could, for example, use one for daytime viewing (e.g., sun shining through window) and one for nighttime viewing (e.g., curtains drawn, lights down).

Parameter	Range			Description
Contrast	–7...0...+7			Adjusts the picture con-
				trast.
Brightness	–7...	0...	+7	Adjusts the picture
				brightness.
Color	–7...	0...	+7	Adjusts the picture
				color.
Tint	–7...	0...	+7	Adjusts the picture tint.
Sharpness	–7...	0...	+7	Adjusts the picture
				sharpness.
Gamma	–7...	0...	+7	Adjusts the brightness
				of darker colors.
Y/C Time	–4...	0...	+4	Corrects small shifts in
Correction				color.

1

Remote controller

Enter

or

Enter

Select Progressive Setting 1, 2, or 3, and then press the [Enter] or Right [ ] button.

The parameters appear onscreen.

2 Use the Up and Down []/[ ] Remote controller buttons to select the parameters,

press the [Enter] button, and then use the Left and Right []/

Enter [ ] buttons to set them.