Integra RDV-1.1 Audio Menu, Scart Output Setting European model only, Digital Out/Digital1 i.LINK

Configuring the RDV-1.1—Continued

3

Remote controller

Enter

When you’ve finished, press the [Enter] button.

The setting is stored.

Use the same procedure to set the other parameters, pressing the [Enter] button when you’ve set each one.

Press the [Setup] button to exit the onscreen setup menu.

PAL

Use this option if your TV doesn’t support NTSC playback, or the picture is distorted when watching NTSC discs. The RDV-1.1 will convert NTSC for- mat video to a PAL-compatible format known as Mod PAL or 60 Hz PAL.

Notes:

• This setting can be changed only when playback is
stopped.
• PAL and AUTO can also be selected from the front
panel. With the RDV-1.1 turned on, while holding
down the Next [	] button, press the [Standby/On]
button to select “Auto” or “PAL.”

SCART Output Setting (European model only)

With this setting you can select the video format to be used for the SCART AV CONNECTOR: RGB, S-Video, or composite video. Before changing this setting, refer to your TV’s manual to see if its SCART input can accept video signals in these formats.

Composite (default)

Composite video offers standard quality.

S-Video

S-Video offers the next best picture quality.

RGB

This format offers the best picture quality. The RGB indicator appears on the display when this option is selected.

Notes:

Notes:

•If you select a format that is not supported by your TV, the setup menu may disappear from the screen. If this happens, switch off your equipment, connect the RDV-1.1 to your TV with a composite video or S-Video cable, and then change this setting.

•Composite, S-Video, and RGB can also be selected from the front panel. With the RDV-1.1 turned on, while holding down the Previous [ ] button, press the [Standby/On] button to select “Composite,” “S-Video,” or “RGB.”

•When RGB is selected, nothing is output by the com- ponent video output (see page 27).

PAL Output Setting (not North American models)

With this setting you can specify how the RDV-1.1 out- puts video signals when playing NTSC format discs.

Auto (default)

Use this option if your TV or projector supports PAL and NTSC. When you play a PAL disc, the video output will be PAL. When you play an NTSC disc, it’ll be NTSC. The RDV-1.1 does not convert the format.

Audio Menu

Digital Out/Digital1 (i.LINK)

With these settings you can determine how the RDV-1.1 outputs digital audio from its i.LINK sockets and DIGI- TAL 1 AUDIO OUTs. The options you choose will depend on the type of component that you connect to the DIGITAL 1 AUDIO OUTs.

■Dolby Digital Out

With this setting you can configure the DIGITAL 1 AUDIO OUTs to output Dolby Digital audio as it is or to downmix it into 2-channel PCM.

Dolby Digital (default)

Choose this option if you’re connecting a component with a built-in Dolby Digital decoder.

Dolby Digital > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input, an AV receiver with a built- in Dolby Pro Logic decoder, or an external D/A converter.

■DTS Out

With this setting you can configure the DIGITAL 1 AUDIO OUTs to output DTS audio as it is or to down- mix it into 2-channel PCM.

DTS (default)

Choose this option if you’re connecting a component with a built-in DTS decoder.

DTS > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A converter.

Notes:

•When playing the DTS audio of a DTS CD, set the CD Audio Setup setting to DTS (see page 81).

75