Integra RDV-1.1 instruction manual Buttons to select Front Speaker

Configuring the RDV-1.1—Continued

On Standby

TV

I Input

	1		2	3	+
					TV CH
	4		5	6	-
	7		8	9
					TV VOL
	+10		0	Clear
	Search	Memory Dimmer			Amp Input
	S		M	D	Input
			Amp Input
	DVD		V1	V2	V3
			Mode
	DVD		Amp	VCR	TV
	Zoom On				Picture Control
Enter			enu	M
	Audio	opM		enu
	Sel	T
	+
	CH
	Zoom		Enter		VOL
	L Mode
	-
		R	eturn	p
				Setu		Setup
	Display				Muting
	Last Memory		Step/Slow		Random
	Rec LM				RD
	Audio	Subtitle		Angle	Resolution
	Audio	Subtitle		Angle	Rsltn
	Repeat		A-B		Aspect
	Repeat		A-B		Aspect
	Video Input	Video Off		Learning
	V In		V Off	L1	L 2
	Open/Close
				L 3	L 4
			RC-561DV

1 Use the Up and Down []/[ ] Remote controller buttons to select Speaker Set-

ting, press the [Enter] button, use

the Up and Down []/[ ] but-

Enter tons to select On, and then press the [Enter] button.

When the Speaker Setting is set to Off, these settings cannot be selected.

3	Use the Up and Down [ ]/[ ]
	buttons to select Front Speaker,

Remote controller press the [Enter] button, use the Left and Right []/[ ] buttons to select an option, and then press

Enter

	the [Enter] button.
	When setting the
	Speaker Setting, for
	speakers with a
	cone diameter
	larger than 6-1/2
	inches (16 cm),	Cone diameter
	specify Large. For
	those with a smaller diameter, specify
	Small. If you’re using THX-certified
	speakers, specify Small for all speakers.
	Large: Select if the front speakers are
	large.
	Small (default): Select if the front
	speakers are small.
	Note that if the Subwoofer setting is set
	to Off, this setting is fixed at Large.
4	Use the Up and Down [ ]/[ ]
	buttons to select Center Speaker,

Remote controller press the [Enter] button, use the Left and Right []/[ ] buttons to select an option, and then press

Enter

the [Enter] button.

Large: Select if the center speaker is large.

Small (default): Select if the center speaker is small.

Off: Select if no center speaker is being used.

Note that if the Front Speaker setting is set to Small, the Large option cannot be selected. And if the Subwoofer setting is set to Off, only the Large and Off options can be selected.

2

Remote controller

Enter

Use the Up and Down []/[ ] buttons to select Subwoofer, press the [Enter] button, use the Left and Right []/[ ] buttons to select an option, and then press the [Enter] button.

Off: Select if no subwoofer is being used.

On (default): Select if a subwoofer is being used.

78