Integra RDV-1.1 Connecting an Hdtv or Projector, Supplied Component, HDTV, projector

Connecting—Continued

1 Turn off the RDV-1.1 and your TV, and dis- connect their power cords from the wall outlets.

2 Connect the RDV-1.1 to your TV as shown.

3 When you’ve completed all connections, see “Turning On the RDV-1.1” on page 43.

Notes:

•Before making any connections, turn off the RDV-1.1 and your TV and disconnect their power cords from the wall outlets.

•Also refer to the hookup pages in your TV’s manual.

•Connect the RDV-1.1’s video outputs directly to your TV. Don’t connect a VCR or other video equipment in between. Doing so may result in picture distortion, because of the copy protection system used on DVD-Video discs.

•See the tables on page 27 for details on how the RDV-1.1 outputs video and audio from each output.

D. Connecting an HDTV or Projector

This section shows how to connect the RDV-1.1 to an HDTV (plasma, LCD) or projector.

Use a commercially available component video cable (BNC) to connect the RDV-1.1’s HD VIDEO OUT COMPONENT 1 or 2 sockets to a component video input on your HDTV. Use the supplied AV cable (RCA) to connect the RDV-1.1’s D.MIX AUDIO OUT to an analog audio input on your HDTV.

RS 232	HDMI	VIDEO IN	VIDEO OUT	AUDIO OUT	IR	D. MIX	FRONT	SURR 1	CENTER	SURR 2
			COMPONENT

Y	Y	DIGITAL 1		DIGITAL 2		L		L
					IN
OUT
PB	PB				OUT	R		R
						REMOTE		SUB
		COAXIAL	OPTICAL	COAXIAL	OPTICAL	CONTROL	AUDIO OUT	WOOFER
PR	PR	DIGITAL 2
		( BALANCED)					HD VIDEO OUT
IN		AES/EBU					COMPONENT
						Y	PB	PR
S400
( AUDIO)						1
S VIDEO

			12V
			TRIGGER
	VIDEO		2
	S VIDEO	VIDEO
1	1+ 2		IN

SURR MODE

(AUDIO OUT)

D. MIX		COMPONENT
(white)		Y PB PR
L
		1
R	AV RCA cable
(red)
AUDIO OUT	(supplied)
		Component
(white)	(red)	video cable
L	R
ANALOG INPUT

Y PB PR

COMPONENT IN

Signal flow

HDTV, projector

Notes:

•The yellow plugs on the supplied AV RCA cable are not used in this example.

•Don’t connect a standard TV to the HD VIDEO OUT COMPONENT 1 or 2 socket, because you’ll get no picture.

•See the tables on page 27 for details on how the RDV-1.1 outputs video and audio from each output.

31