Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Standard CMOS Features

 

 

 

 

 

 

 

Date (mm:dd:yy)

Fri, Jan 9 2004

 

 

Item Help

Time (hh:mm:ss)

22:31:24

 

 

Menu Level `

` IDE Channel 0 Master

 

 

 

Change the day, month,

[None]

 

 

year

 

` IDE Channel 0 Slave

[None]

 

 

 

 

` IDE Channel 1 Master

[None]

 

 

<Week>

 

` IDE Channel 1 Slave

[None]

 

 

Sun. to Sat.

Drive A

 

[1.44M, 3.5"]

 

<Month>

Drive B

 

[None]

 

 

Jan. to Dec.

Floppy 3 Mode Support

[Disabled]

 

 

 

 

 

 

 

 

<Day>

 

Halt On

 

[All, But Keyboard]

 

1 to 31 (or maximum

 

 

 

 

 

allowed in the month)

Base Memory

 

640K

 

 

 

 

Extended Memory

127M

 

 

<Year>

 

Total Memory

 

128M

 

 

1999 to 2098

 

 

 

 

 

 

 

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Date

 

 

 

 

 

 

The date format is <week>, <month>, <day>, <year>.

 

 

 

Week

From Sun. to Sat., determined by the BIOS and for display only.

Month

From Jan. to Dec.

 

 

 

 

Day

From 1st to 31st (or the maximum allowed in the month)

 

Year

From Year 1999 to 2098

 

 

 

 

Time

The format used to express time is hours:minutes:seconds. The time is calculated based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Channel 0/Channel 1 Master(Slave) setup You can use one of the three methods below:

Auto

Allows BIOS to automatically detect IDE devices during POST. (Default value)

None

Select this if no IDE devices are used and the system will skip the automatic

 

detection step and allow for faster system start up.

Manual

User can manually input the correct settings

Access Mode

Use this to set the access mode for the hard drive. The four options are:

 

CHS/LBA/Large/Auto (Default:Auto)

Capacity

Capacity of currently installed hard disk.

Hard drive information should be labeled on the outside drive casing.

Enter the appropriate option based on this information.

Cylinder

Number of cylinders

Head

Number of heads

Precomp

Write precomp

Landing Zone

Landing zone

Sector

Number of sectors

English

 

 

 

- 23 -

BIOS Setup

Page 23
Image 23
Intel 8S661FXMP-RZ Standard Cmos Features, Date, Time, IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave