Intel A300 - page 138

A300 Motherboard
The Init. Graphic Adapter Priority option selects the graphics controller the system uses
as a primary boot device. The options are:
 Internal VGA
 PCI/Int-VGA
 Internal Graphics Mode Select [Enable, 32MB]
The Internal Graphic Mode Select option determines the amount of system memory that
can be used by the Internal graphics device.

Disable

Enable, 1MB 1MB of memory used by internal graphics device

Enable, 4MB 4MB of memory used by internal graphics device

Enable, 8MB 8MB of memory used by internal graphics device

Enable, 16MB 16MB of memory used by internal graphics device

Enable, 32MB (Default) 32MB of memory used by internal graphics device
 Graphics Aperture Size [64MB]
The Graphics Aperture Size option selects the size of the AGP aperture. The aperture is
a portion of the PCI memory address range dedicated as graphics memory address
space.

64MB (Default) Graphics aperture size set as 64MB

128MB Graphics aperture size set as 128MB

256MB Graphics aperture size set as 256MB
 Boot Display Device [CRT+LEP]
The Boot Display Device BIOS option selects the display device the system uses when it
boots. The available options are listed below:
Page 123