A300 Motherboard
turned on or off
Suspend When the power button is pressed the system goes into
suspend mode
Restore on AC Power Loss [Last State]
The Restore on AC Power Loss BIOS option specifies what state the system returns to if
there is a sudden loss of power to the system.
Power Off The system remains turned off
Power On The system turns on
Last State (Default) The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
Resume on Ring [Disabled]
The Resume on Ring BIOS option specifies if the system will be roused from a
suspended or standby state when there is activity on the RI (ring in) modem line. That is,
the system will be roused by an incoming call on a modem.
Disabled (Default) Wake event not generated by an incoming call
Enabled Wake event generated by an incoming call
Resume on PME#/Onboard LAN [Disabled]
The Resume on PME# BIOS option specifies if the system will be roused from a
suspended or standby state when there is activity on the PCI PME (power management
event) controller or on-board LAN controller.
Disabled (Default) Wake event not generated by PCI PME controller or
on-board LAN controller activity
Enabled Wake event generated by PCI PME controller or
Page 128