A300 Motherboard
5.3 CPU and CPU Cooling Kit Installation
WARNING:
A CPU should never be turned on without the specified cooling kit
being installed. If the cooling kit (heat sink and fan) is not properly
installed and the system turned on, permanent damage to the CPU,
A300 and other electronic components attached to the system may be
incurred. Running a CPU without a cooling kit may also result in injury
to the user.
The CPU, CPU cooling kit and DIMM are the most critical components of the A300. If one
of these component is not installed the A300 cannot run.
5.3.1 Socket 479 CPU Installation
WARNING:
CPUs are expensive and sensitive components. When installing the
CPU please be careful not to damage it in anyway. Make sure the CPU
is installed properly and ensure the correct cooling kit is properly
installed.
To install a socket 479 CPU onto the A300, follow the steps below:
WARNING:
When handling the CPU, only hold it on the sides. DO NOT touch the
pins at the bottom of the CPU.
Page 64