Intel BOXDC53427HYE specifications System Memory, Supported Memory Configurations

Product Description

1.4System Memory

The board has two 204-pin SO-DIMM sockets and supports the following memory features:

•1.5 V DDR3 SDRAM SO-DIMMs with gold plated contacts

•Support for 1.35 V Low Voltage DDR3 (new JEDEC specification)

•Two independent memory channels with interleaved mode support

•Unbuffered, single-sided or double-sided SO-DIMMs

•16 GB maximum total system memory (with 4 Gb memory technology). Refer to Section 2.1.1 on page 41 for information on the total amount of addressable memory.

•Minimum recommended total system memory: 1024 MB

•Non-ECC SO-DIMMs

•Serial Presence Detect

•DDR3 1600 MHz and DDR3 1333 MHz SDRAM SO-DIMMs

NOTE

To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the SO-DIMMs may not function under the determined frequency.

Table 4 lists the supported SO-DIMM configurations.

Table 4. Supported Memory Configurations

SO-DIMM	Configuration (Note)	SDRAM	SDRAM Organization		Number of SDRAM
Capacity		Density	Front-side/Back-side		Devices
1024 MB	SS	1 Gbit	128	M x8/empty	8
2048 MB	DS	1 Gbit	128	M x8/128 M x8	16
2048 MB	SS	2 Gbit	256	M x8/empty	8
4096 MB	DS	2 Gbit	256	M x8/256 M x8	16
4096 MB	SS	4 Gbit	512	M x8/empty	8
8192 MB	DS	4 Gbit	512	M x8/512 M x8	16

Note: “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to single-sided memory modules (containing one row of SDRAM).

For information about…	Refer to:
Tested Memory	http://support.intel.com/support/motherboards/desktop/sb
	/CS-025414.htm

19