Intel NUC D53427RKE Technical Product Specification
Figure 10. Connection Diagram for Front Panel Header
2.2.2.4.1Hard Drive Activity LED Header
Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires a SATA hard drive or optical drive connected to an onboard SATA connector.
2.2.2.4.2Reset Switch Header
Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST.
2.2.2.4.3Power/Sleep LED Header
Pins 2 and 4 can be connected to a one- or
Table 15. States for a One-Color Power LED
LED State | Description |
|
|
Off | Power off |
|
|
Blinking | Standby |
|
|
Steady | Normal operation |
|
|
NOTE
The LED behavior shown in Table 15 is default – other patterns may be set via BIOS setup.
50
