Intel D945GCLF2 specifications 1.6.2 USB

Intel Desktop Board D945GCLF2 Technical Product Specification

1.6.2USB

The board supports up to eight USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers.

The ICH7 provides the USB controller for all ports. The port arrangement is as follows:

•Four ports are implemented with dual stacked back panel connectors

•Four ports are routed to two separate front panel USB headers

NOTE

Computer systems that have an unshielded cable attached to a USB port may not meet FCC Class B requirements, even if no device is attached to the cable. Use shielded cable that meets the requirements for full-speed devices.

For information about	Refer to
The location of the USB connectors on the back panel	Figure 8, page 41
The location of the front panel USB headers	Figure 9, page 42

18