Intel Desktop Board D945GCLF2 Technical Product Specification
2.3Jumper Block
CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged.
Figure 12 shows the location of the jumper block. The jumper determines the BIOS Setup program’s mode. Table 21 lists the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is
Figure 12. Location of the Jumper Block
Table 21. BIOS Setup Configuration Jumper Settings
Function/Mode | Jumper Setting Configuration | |
Normal | The BIOS uses current configuration information and | |
|
| passwords for booting. |
| 3 | 2 1 |
Configure | After the POST runs, Setup runs automatically. The | |
|
| maintenance menu is displayed. |
| 3 | 2 1 |
Recovery | None | The BIOS attempts to recover the BIOS configuration. See |
|
| Section 3.7 for more information on BIOS recovery. |
| 3 2 1 |
50