Intel D945GCLF2 specifications S-Video Output, Legacy I/O Controller, Serial Port, Parallel Port

Product Description

1.8S-Video Output

The board supports S-Video output via a 7-pin S-Video connector supporting both 4-pin S-Video and Composite signal.

1.9Legacy I/O Controller

The I/O controller provides the following features:

•One serial port

•One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port (EPP) support

•Serial IRQ interface compatible with serialized IRQ support for PCI Conventional bus systems

•PS/2-style mouse and keyboard interfaces

•Intelligent power management, including a programmable wake-up event interface

•PCI Conventional bus power management support

The BIOS Setup program provides configuration options for the I/O controller.

1.9.1Serial Port

The serial port A connector is located on the back panel. The serial port supports data transfers at speeds up to 115.2 kbits/sec with BIOS support.

For information about	Refer to
The location of the serial port A connector	Figure 8, page 41

1.9.2Parallel Port

The 25-pin D-Sub parallel port connector is located on the back panel. Use the BIOS Setup program to set the parallel port mode.

For information about	Refer to
The location of the parallel port connector	Figure 8, page 41

21