Intel E7501 user manual Standard CMOS Setup, Date

BIOS SETUP

Standard CMOS Setup

“Standard CMOS Setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the Server Motherboard is already installed in a working system, you will not need to select this option. You will need to run the Standard CMOS option, however, if you change your system hardware configurations, the onboard battery fails, or the configuration stored in the CMOS memory was lost or damaged.

Phoenix - Award WorkstationBIOS CMOS Setup Utility

Standard CMOS Features

Date (mm:dd:yy)	Tue, Jan 1 2002	Item Help
Time (hh:mm:ss)	00 : 00 : 00	Menu Level
IDE Primary Master	None	Change the day, month,
IDE Primary Slave	None	Year and century
IDE Secondary Master	None
IDE Secondary Slave	None
Drive A	1.44M, 3.5 in.
Drive B	None
Video	EGA/VGA
Halt On	All Errors
Base Memory	640K
Extended Memory	129024K
Total Memory	130048K

At the bottom of the menu are the control keys for use on this menu. If you need any help in each item field, you can press the <F1> key. It will display the relevant information to help you. The memory display at the lower right-hand side of the menu is read-only. It will adjust automatically according to the memory changed. The following describes each item of this menu.

Date

The date format is:

Day :	Sun to Sat
Month :	1 to 12
Date :	1 to 31
Year :	1994 to 2079

To set the date, highlight the “Date” field and use the PageUp/ PageDown or +/- keys to set the current time.

AFW-3000 User’s Manual 27