BIOS SETUP
Super IO Device
This field contains options related to IO devices including FDD, serial ports, IR, and parallel port devices. The options and the respective default settings are listed below.
POWER ON Function: BUTTON ONLY
KB Power ON Password: Enter
Onboard FDC Controller :
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
UART Mode Select : Normal
RxD, TxD Active : Hi, Lo
IR Transmission Delay : Enabled
UR2 Duplex Mode : Half
Use IR Pins :
Onboard Parallel Port : 378/IRQ7
Parallel Port Mode : SPP
EPP Mode Select : EPP1.7
ECP Mode Use DMA : 3
PWRON After
35 |
