Intel ETX CD manual Connector X3 Signal Description, VGA Output, Serial Ports 1, PS/2 Keyboard

4 ETX® connectors

4.5.2Connector X3 Signal Description

VGA Output

LVDS Flat Panel Interface (JILI)

The user interface for flat panels is the JUMPtec Intelligent LVDS Interface (JILI). The implementation of this subsystem complies with the ETX® Specification. Implementation information is provided in the ETX® Design Guide. Refer to the documentation for additional information.

Digital Flat Panel Interface (JIDI)

The ETX®-CD does not support the JUMPtec Intelligent Digital Interface (JIDI).

Serial Ports (1 and 2)

The ETX®-CD supports two serial interfaces (TTL). You can use COM2 for IrDA SIR operation. This feature is implemented in the super I/O device, which is a Winbond 83627HF.

The implementation of the serial interface complies with the ETX® Specification. Implementation information is provided in the ETX® Design Guide. Refer to the documentation for additional information.

Configuration:

The serial-communication interface uses I/O and IRQ resources. The resources are allocated by the BIOS during POST configuration and are set to be compatible with common PC/AT settings. Use the BIOS setup to change some parameters that relate to the serial-communication interface.

PS/2 Keyboard

The implementation of the keyboard interface complies with the ETX® Specification. Implementation information is provided in the ETX® Design Guide. Refer to the documentation for additional information.

Configuration:

The keyboard uses I/O and IRQ resources. The BIOS allocates the resources during POST configuration. The resources are set to be compatible with common PC/AT settings. Use the BIOS setup to change some keyboard-related parameters.

PS/2 Mouse

The implementation of the mouse interface complies with the ETX® Specification. Implementation information is provided in the ETX® Design Guide. Refer to the documentation for additional information.

Configuration:

The mouse uses I/O and IRQ resources. The BIOS allocates the resources during POST configuration. The resources are set to be compatible with common PC/AT settings. You can change some mouse-related parameters from the BIOS setup.

Kontron User's Guide ETX CD 31