Intel GA-945PL-S3P The Main Menu For example GA-945PL-DS3P BIOS Ver. E1, TAB POST Screen, English

English

Startup Screen: (For example: GA-945PL-DS3P BIOS Ver.: E1)

<TAB>:POST Screen <DEL>:BIOS Setup/Q-Flash <F9>:XpressRecovery2 <F12>:Boot Menu<<End>: Qflash

<TAB> : POST Screen

Press the TAB key to see BIOS POST screen.

(To show the BIOS POST screen at system startup, refer to the instructions on the Full Screen LOGO Show item on page 35.)

<DEL> : BIOS Setup/Q-Flash

Press the DELETE key to enter BIOS Setup program.

<F9> : Xpress Recovery2

Press the F9 key to enter the Xpress Recovery2 screen.

<F12> : Boot Menu

Press the F12 key to enter Boot Menu to select the first boot device.

The Main Menu (For example: GA-945PL-DS3P BIOS Ver.: E1)

Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software

`	Standard CMOS Features	Load Fail-Safe Defaults
`	Advanced BIOS Features	Load Optimized Defaults
`	Integrated Peripherals	Set Supervisor Password
`	Power Management Setup	Set User Password
`	PnP/PCI Configurations	Save & Exit Setup
`	PC Health Status	Exit Without Saving
`	MB Intelligent Tweaker(M.I.T.)

ESC: Quit	KLJI: Select Item
F8: Q-Flash	F10: Save & Exit Setup
	Time, Date, Hard Disk Type...

1. If you don’t find the settings you want, press "Ctrl+F1" to access advanced options.

2. Select the Load Optimized Defaults item in the BIOS Setup when somehow the system is not stable as usual. This action makes the system reset to the default settings for stability.

3. The BIOS Setup menus described in this chapter are for reference only and may differ from the exact settings for your motherboard.

GA-945PL-(D)S3P Motherboard - 30 -