Intel GA-945PL-S3P, GA-945PL-DS3P Advanced Bios Features, Hard Disk Boot Priority, Password Check

English

2-2	Advanced BIOS Features
		CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
			Advanced BIOS Features
`	Hard Disk Boot Priority		[Press Enter]		Item Help
	First Boot Device		[Floppy]		Menu Level`
	Second Boot Device		[Hard Disk]
	Third Boot Device		[CDROM]
	Password Check		[Setup]
	HDD S.M.A.R.T. Capability		[Disabled]
	CPU Hyper-Threading (Note)		[Enabled]
	Limit CPUID Max. to 3 (Note)		[Disabled]
	No-Execute Memory Protect (Note)		[Enabled]
	CPU Enhanced Halt (C1E) (Note)		[Enabled]
	CPU Thermal Monitor 2(TM2) (Note)		[Enabled]
	CPU EIST Function (Note)		[Enabled]
	Virtualization Technology (Note)		[Enabled]
	Full Screen LOGO Show		[Enabled]
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Hard Disk Boot Priority

Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.

Use <> or <> to select a device, then press<+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.

First / Second / Third Boot Device

Floppy	Select your boot device priority by Floppy.
LS120	Select your boot device priority by LS120.
Hard Disk	Select your boot device priority by Hard Disk.
CDROM	Select your boot device priority by CDROM.
ZIP	Select your boot device priority by ZIP.
USB-FDD	Select your boot device priority by USB-FDD.
USB-ZIP	Select your boot device priority by USB-ZIP.
USB-CDROM	Select your boot device priority by USB-CDROM.
USB-HDD	Select your boot device priority by USB-HDD.
LAN	Select your boot device priority by LAN.
Disabled	Disable this function.

Password Check

Setup	The system will boot but will not access to Setup page if the correct
	password is not entered at the prompt. (Default value)
System	The system will not boot and will not access to Setup page if the correct
	password is not entered at the prompt.

If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.

(Note) This item will show up when you install a processor which supports this function.

GA-945PL-(D)S3P Motherboard - 34 -