English
4-1-3 Flash BIOS Method Introduction
A. What is Dual BIOS Technology ?
Dual BIOS means that there are two system BIOS (ROM) on the motherboard, one is the Main BIOS and the other is Backup BIOS.
Under the normal circumstances, the system works on the Main BIOS. If the Main BIOS is corrupted or damaged, the Backup BIOS can take over while the system is powered on. This means that your PC will still be able to run stably as if nothing has happened in your BIOS.
B. How to use Dual BIOS and Q-Flash Utility?
a. After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it will allow you to enter Award BIOS CMOS SETUP, then press <F8> to enter Dual BIOS /
CMOS Setup
Standard CMOS Features | Load | |
Advanced BIOS Features | Load Optimized Defaults | |
Integrated Peripherals | Set Supervisor Password | |
Power Management Setup | Set User Password | |
PnP/PCI Configurations | Save & Exit Setup | |
PC Health Status | Exit Without Saving | |
MB Intelligent Tweaker(M.I.T.) |
|
|
ESC: Quit | : Select Item | F11: Save CMOS to BIOS |
F8: Dual | F10: Save & Exit Setup | F12: Load CMOS from BIOS |
| Time, Date, Hard Disk Type... |
|
b.Dual BIOS /
Dual BIOS Utility V2.02
Boot From | Main Bios |
|
Main ROM Type/Size | SST 49LF004A | 512K |
Backup ROM Type/Size | SST 49LF004A | 512K |
Wide Range Protection | Disable |
Boot From | Main Bios |
Auto Recovery | Enable |
Halt On Error | Disable |
Keep DMI Data | Enable |
Copy Main ROM Data to Backup
Load Default Settings
Save Settings to CMOS
Update Main BIOS from Drive
| Update Backup BIOS from Drive |
| |
| Save Main BIOS to Drive |
| |
| Save Backup BIOS to Drive |
| |
PgDn/PgUp: Modify | : Move | ESC: Reset | F10: Power Off |
- 68 - |
